Reinstalling engine with new bonding straps. Part numbers are specified in Fig. 66A. However, I cannot find any detailed assembly order in the service manual. Can you state what the order is? Example: bolt, bonding strap, washer, Lord mount, washer, nut? Or does the bonding strap go between the "nut side" washer and nut?
Engine Bonding Strap Assemby
0 You Like ThisModel: Bonanza V35A
Aircraft Serial Number: D-8701
Posted 3/3/2023 - 2 months ago
|
Replies Sort
Generally speaking, they by-pass the Lord mount. If the strap has a 1/4" hole, that goes on the aft bolt of the 6 that hold the rear mount pad to the airframe, the other end with the 3/8" hole goes on one of the three studs that hold the mount pad to the engine oil sump. Strap would be buffered by a washer that is adjacent to either a bolt head or nut. Installation typical left and right.
Mike
ABS Tech Advisor
Posted 3/3/2023 - 2 months ago
|
Quote
0 You Like This