Skip to main content

Built in oxygen system

My built in oxygen tank shows 1500 lbs but no oxygen flows when I plug in the cannula and turn on regulator by pilots left side.

Any one have a similar issue or any idea what could be wrong.

Model: Bonanza A36TC
Aircraft Serial Number: Ea 98
Posted 5/27/2021 - 4 months ago
|

Replies Sort

There is a shut off valve on the Oxygen control console that must be turned on to get O2 from the system.
If it is turned on, I would check the tank to make sure the valve is turned on at the tank.

Bob Ripley
ABS Technical Advisor

Posted 5/28/2021 - 4 months ago
|
Quote

Built in oxygen system