Skip to main content

Inner cabin door handle removal

I need to remove the inner door panel to inspect the door opening/locking assembly. The drawings I have show what I believe to be a roll pin in the internal door handle that will allow removal of the handle assembly so I can remove the inner door panel to gain access. I believe this pin is associated with the larger hole in the handle assembly. I've attempted to displace but not being successful and want to confirm my information before a I get too aggressive and cause damage if my information is not correct. Please advise.

Inner door handle assembly.jpg - 687.7 KB

Model: Bonanza V35A
Aircraft Serial Number: 8991
Posted 11/3/2023 - 3 months ago
|

Replies Sort

The later style handle is all one piece.
To remove all you have to do is remove the 2 screws in the plate that hold it to the door panel.
Be sure you mark the position of the plate on door panel before you remove.

Bob Ripley
ABS Technical Advisor

Posted 11/3/2023 - 3 months ago
|
Quote

Inner cabin door handle removal