Skip to main content

Single yoke bearing replacement

I need to replace the B57 PN roller pin bearing in my yoke assembly. Just looking to see if there is any advice or gotcha I should be aware of. Is it required to pressed in and out or is there an easier way of removing and installing etc.

Thank you
Bruce

Model: Bonanza V35
Aircraft Serial Number: D-8591
Posted 11/21/2023 - 3 months ago
|

Replies Sort

On figure 72, item #4 in the H-V35 IPC it shows a B78X bearing. Textron changes the number to B78. I use an internal bearing slide hammer puller.
I have attached the IPC reference.

Bob Ripley
ABS Technical Advisor

attachment

BONANZA ILLUSTRATED PARTS CATALOG P_N 35-590015-9.pdf - 336.6 KB

Posted 11/21/2023 - 3 months ago
|
Quote

Thank you. I did ordered the correct bearing it is the B78. I mis-typed the PN. I appreciate the help.
Interesting an internal slider hammer puller. Thank you.

Bruce

Posted 11/21/2023 - 3 months ago
|
Quote

FYI I was able to remove the bearing with the internal bearing puller hammer. Thank you for the advice.

Posted 12/1/2023 - 2 months ago
|
Quote

Be very careful when reinstalling as the housing is a little fragile.

Bob Ripley
ABS Technical Advisor

Posted 12/1/2023 - 2 months ago
|
Quote

Single yoke bearing replacement